If your kit contains an envelope liner, here is how I attach them.
The liner is printed on both sides, so first you have to decide which design you want to show when the envelope is opened.
Slide the insert into the envelope. Line up the indentation on the liner with the crease in the envelope - both sides.
Place fingertips against the fold line as you fold up the envelope flap - closing the envelope.
Press firmly to crease the liner.
Lift just the envelope flap - holding the insert down.
Put glue on the exposed (back side) piece of the liner.
Close the flap again - pressing firmly.
The lining that matches the card inside adds a little extra something to your card.
No comments:
Post a Comment