Multilayered Card

 Multilayered Card 

Card front

Second layer 

Card back layer 

DSP - Let’s Go Fishing 

   Print A ( blue fish) 2 3/4 x 3 3/4 inches

   Print B (blue waves)  3 3/4 x 1 inches (2)

   Print C (lures) 3 3/4 x 1 inches (2)

   Print D (colorful fish) 

Boho Blue card stock - 5 1/2 x 8 1/2 inches

Pebbled Path card stock - 4 x 1 1/4 inches (2), 5 1/2 x 1 inches

Very Vanilla card stock - 5 x 3 3/4 inches, 2 3/4 x 3/4 inches 

Fold Boho Blue card in half to form card base. 

Cut 1 1/4 along outside edges to the fold. 

Glue 5 1/2 x 1 inch Pebbled Path strip to connect the 2 outside strips of the card front.  

The middle section should be behind the Pebbled Path strip. ( if not you can gently push it through). 

Glue DSP A to the center section of card front. 

 Glue DSP B strips to the outside strips of the card front. 

Glue DSP C strips to the Pebbled Path 3 3/4 x 1 1/4 strips.  Adhere the strips to the outer edges of the Very Vanilla large rectangle. 

Glue inside card. 

If desired, cut roughly around 2 or 3 fish on DSP D. Glue the flush onto Very Vanilla scraps then trim closely.  ( the very vanilla keeps the backside from being visible when the card is open. ).  

Arrange fish and blank Very Vanilla tiny strip  on card front to determine placement and where to stamp the sentiment (centered or off-centered). 

Stamp sentiment and glue everything to card front. Be careful to not get glue on the middle section. 

If desired, choose some partial fish and add them to the center of the inside to look like fish swimming past a window.